Weather resistant lift

Our weather resistant outdoor lifts offer comfortable access to all floors and create a seamless flow between indoor and outdoor areas, that will make your interior feel more spacious.

All-inclusive lift concept

The lift is delivered in prefabricated modules with everything you need for installation, including a ready-made lift shaft in steel or glass.

Weather resistant lift

Our standard outdoor equipment ensures that our lifts are weather resistant: Anti-corrosive treatment of bottom frame and platform. Flood protected electrical compartment. Aluminium doors and weather resistant call buttons. Outdoor roof and door canopies.

Space-efficient solution

Cibes outdoor lifts have minimal structural impact on your building and the passenger platform constitutes 70% of the total footprint of the lift. A great use of space!

Installation in 3-4 days

Our ready-made lift concept speeds up the installation and minimises the impact on your building.

The outdoor concept is available for platform sizes 1000×1467 and 1100×1467 mm and ensures that your lift is weather resistant.

  • Slanted outdoor roof, protecting the lift from rain and snow.
  • Door canopies in plexiglas or steel.
  • Elegant, rust proof aluminium doors.
  • Sealed, weather resistant call buttons.
  • Sealed glazed shaft panels.
  • Bottom frame with anti corrosive coating.
  • Flood protected electrical compartment.

Our outdoor lifts are designed to function within a temperature span of approximately -10° to +30° Celsius. For more extreme climates, we offer additional options and solutions for temperature control.

Our outdoor lifts are equipped to resist hot and cold temperatures, rain and snow. Discover our weather resistant lift concept!

Outdoor roof

The roof is designed to handle rain and snow (3kN/m², snow zone 3). The slope of the roof can be configured in 3 directions.

Aluminium doors

Aluminium door AL5 (to the left) is standard for outdoor lifts, the fully glazed AL6 (to the right) is available as an option.

Canopy in plexiglas

The canopy in plexiglas looks light and elegant and shelters you from rain and light snow at entrance and exit.

Canopy in steel

The steel canopy is very sturdy and offers you reliable protection against rain and snow at entrance and exit.

Weather resistant call buttons

The push button in stainless steel is class IP55 and the aluminium faceplate is sealed to resist rain and humidity.

Immaculate finish

No rivets are visible on the inside the shaft. The corner profile includes a cover to hide all rivets, for an immaculate finish.

Sealed glass panels

The glass panels of the lift shaft are equipped with a rubber seal to prevent water infiltration and reduce condensation.

Smart heating solutions

To protect lift electronics at low temperatures, we offer heating pads for the door looks and a fan heater for the machine room.

A/C ready

If you live in a hot climate, adding an air conditioning system to your lift is a great way to ensure both passenger comfort and lift function. Cibes outdoor lifts are available A/C ready and the option includes a connection box to facilitate installation.

Drip plate

If you live in a place where it often rains, the drip plate is a great option. Placed at the base of the shaft, the drip plate leads the rainwater away from the lift.

Gutter ready

Another smart solution to evacuate rainwater is to install a gutter and a drain pipe. Our outdoor roofs are available with fixings to facilitate the installation!

Snow fence

If you live in a place where it snows in wintertime, the snow fence is a great safety feature that prevents the sudden release of snow and ice from the roof.

The LED lit canopy offers you a nice-looking lighting effect as well as a practical, additional light source at night-time.

The flexible design of Cibes outdoor lifts is easy to adapt to different applications and architectural styles. You just decide what you want your lift to look like and we make sure that you get a lift with the options and accessories to suit your needs.

Lift in any RAL

Our lifts are available in 250+ RAL colours. Find the perfect shade for you lift in the RAL colour chart.

Matching faceplate

The call button faceplate is delivered in grey or white as standard but is available in any RAL or premium colour as an option, to match your lift.

Canopy in plexiglas

Delivered in natural, anodised aluminium and plexiglas as standard, the rims and fixings of the canopy are available in any RAL or premium colour.

Technical information

  • Installation:Outdoor
  • Rated load:400/500 kg
  • Power supply:1 × 230 VAC/3 × 230 VAC/3 × 400 VAC, 50 Hz, 16 A, 3 × 2,5 mm²
  • Speed:Max 0.15 m/s
  • Min headroom:Depends on lift configuration
  • Lift pit:0/50 mm
  • Drive system:Screw and nut
  • Max travel:13 m
  • Max number of stops:6
  • Lift controls:One touch (automatic drive) on landings, hold-to-run on platform
  • Motor Power:2.2 kW
  • Machine room:Integrated (MRL)
  • Door configuration:Single access, open-through, adjacent
  • Directives and standards:MD 2006/42/EC, EN 81-41

Call us on 22210 94777 or fill out the contact form and one of our specialist advisors will contact you soon!